The TBJ Model 66-108 HT-C hydraulic animal surgery table is a large, heavy duty table designed for use with large animals up to 4,000 pounds.

• 66″ x 108″ work surface with a 3″ raised perimeter edge and a 18″ x 36″ recessed access area in the middle of one side of the work top.
• The work surface is sloped to a 48″ opening on one side of the table for drainage to a floor drain.
• The underside of the table top includes a bearing assembly that allows 360 degree rotation of the table top. The bearing assembly has a locking mechanism that allows the table top to be locked into positions at 15 degree intervals.
• The hydraulic cylinder is a heavy duty, single acting cylinder having a ram diameter of 10 1/2″ with .001 hard chrome plating. It shall have a total working stroke of 40″.
• A gusseted mounting plate with holes is welded to the outside casing of the cylinder for anchoring to the pit floor.
• A hydraulic pumping unit powered by a 5 HP motor directly connected to a fixed displacement pump is utilized for raising and lowering the cylinder. A 30-gallon oil reservoir is included.
• The control box is designed for remote wall mounting and includes one “Raise” button, one “Lower” button.
• 13 5/8″ low height and 47 5/8″ raised height
• 208 V, 3PH, 60HZ