The TBJ Model 28-110-2B SPCS work sink is specifically designed for use in GI Labs and Sterile Processing Departments for the pre-cleaning of flexible endoscopes. The unit includes two sink bowls thus meeting AAMI guidelines for having a minimum of two separate sink basins……one for manual cleaning and leak testing and one for rinsing of scopes. The work sink shall have the following configuration and features:

• Two 35” x 21” x 10 ½” deep sink bowls
• (2) deck mounted hot/cold water faucets center between each sink bowl
• (1) deck mounted cold water pre-rinse spray located at the left sink bowl
• The sink top shall be 36” above the finished floor. The OPTIONAL ergonomic, electrically operated hydraulic lift system is included and enables the sink top height to be adjusted from 32” to 40” high via a rocker switch control
• An OPTIONAL ½” think x 9 ½” high x 24” long anti-splash lexan shield is included to provide separation between sink bowls
• Two lever handle drain controls for remote sink draining are included
• Full length, 28” wide undershelf below sink top for storage
• Overall dimensions: 28” W x 110” L

Construction/Design:

• Heavy duty stainless steel construction
• Type 304 stainless steel sink top, 14 gauge, #4 finish
• Type 304 stainless steel tubular base frame made of 1 ½” square x 16 gauge wall tubing
• Adjustable leveling feet
• Seamless heliarc welded construction
• All exposed welds ground and polished
• 9 ½” high backsplash extending the length of the sink top
• NSF approved 14 gauge sink bowls with cove corners
• 1/8” high marine edge on around front and sides
• Hospital grade, chrome plated brass faucets and fixtures
• Lever handle drain controls
• Sink bowl sizes and overall dimensions can be customized around your specific needs
• A wide variety of optional features are available to add to the base unit