Downdraft Work Surfaces
Detachable Sliding Instrument Tray
Fold Down Shelf Extension
Pull Out Writing Surface
Recessed Perforated Pan Insert and Panel
Removable Hoods and Fixed Hoods
Detachable Side Shelf
Removable Sink Cover
Stainless Steel Divider Inserts
Thermoplastic Cutting Board
-
Downdraft Work Surfaces
Downdraft work surfaces can be customized for special procedures and for reduced air flow requirements. Perimeter perforated work surfaces reduce the amount of open area on the table thus reducing the CFM requirements. This is particularly effective when a know percentage of table surface is typically covered during procedures. Hole sizes from 1/8" to 1/2" can be provided based upon what is best for your specific procedures. -
Detachable Sliding Instrument Tray
Detachable Sliding Instrument Tray provides a convenient dry work area adjacent to the main work surface, perfect for keeping instrument and supplies handy. An economical way to add work space. -
Fold Down Shelf Extension
Our fold down shelf extensions can be placed on the side or end of our tables to provide additional work surface area. In the upright position the shelf locks easily and securely into place. It folds down quickly and easily as well for out of the way storage when not needed or it can be completely removed. -
Pull Out Writing Surface
The pull out writing surface provides a sturdy, convenient surface for note taking and documentation right at the workstation. The surface conveniently slides underneath the work surface for out of the way storage when not in use. -
Recessed Perforated Pan Insert and Panel
The recessed perforated pan insert provides a recessed area for rinsing specimens and also provides a lowered surface to recess containers such as beakers closer to the ventilated work surface. The pan insert and panel can be supplied as an additional interchangeable panel that replaces the standard perforated panel to allow you to switch back and forth between both panel types. -
Removable Hoods and Fixed Hoods
Many TBJ tables can be supplied with an option removable or fixed hood to provide a greater degree of containment for protection from aerosols and contaminants. The hood shown in these photos has two hinged viewing windows and an integral fluorescent light fixture with ON/OFF switch. -
Detachable Side Shelf
The detachable side shelf mounts on either side of the table to create additional work space as well as a storage area for instruments and tools. It can be moved anywhere along the table edge between the pedestal bases. An optional cutting board insert is available. Sizes can be customized. -
Removable Sink Cover
Removable sink covers are available for most TBJ tables to provide additional flat work surface area. Covers can be perforated with various hole sizes or they can be solid stainless steel. -
Stainless Steel Divider Inserts
Features:
- Creates individual workstations instantly and economically
- Enhances airflow and containment
- Height can be adjusted to your specifications
- Increases the utility of your workspace
-
Thermoplastic Cutting Board
High density, non-porous surface thermoplastic cutting boards provide a clean, stable cutting area. They will not absorb liquids or odors, are easy to clean and are NSF listed. They are available in a variety of sizes and configurations. Our boards can be recessed into the perforated panel or work top to make them level with the work surface to provide an ergonomic design that reduces wrist fatigue.
