Reprocessing Sink Model SPD 30-117-3B-WS-AH

The TBJ Model 30-117-3B-WS-AH work sink is specifically designed for use in hospital sterile processing departments for the pre-cleaning of grossly soiled surgical instruments, utensils, endoscopes and other miscellaneous items prior to automated washing/disinfection cycles. The unit includes three 30” sink bowls to better accommodate robotic instruments. The work sink shall have the following configuration and features.

Features:

  • (3) 30” x 16” x 10.5” deep sink bowls with etched gallon indicator markings
  • The left sink includes Hydro-force rinse system with pump, adjustable timer, push-button control and on/off switch.
  • The center sink includes heated ultrasonic power and control unit and has ultrasonic transducers mounted to underside of sink bowl. (ultrasonic power unit requires 120V electrical). (Bowl 2)
  • (3) Pull-up drain controls
  • (2) Automatic sink bowl fill with timer and push-button (Bowls 1 and 2)
  • (2) Automatic detergent dispensing with push-button pre-sets, soak timer and temperature monitoring (bowls 1 and 2)
  • (2) Heated sink bowls with digital thermostat control (Bowls 1 and 2)
  • 4” high back splash
  • Marine edge around front and side perimeter
  • (2) Hot/cold water faucets with swing gooseneck and wrist-blade handles
  • (1) Hot/cold water pre-rinse sprayer with wrist-blade handles
  • (1) Selecta water pistol
  • (1) Selecta air pistol
  • (1) Set of (8) pistol attachments for Selecta pistols
  • (1) DI/RO pure water faucet
  • Push-button height adjustment with 8” travel range
  • Optional rigid telescoping drains to accommodate height adjustment
  • Under-counter storage shelves provided in movable/removable sections
  • Temperature monitor (bowl 3)
  • (2) Anchorage brackets (expansion anchor hardware, seismic calculations and OSHPD approval not included)
  • Overall dimensions: 30” wide x 117” long


  • Construction/Design:

  • Heavy duty stainless steel construction
  • Type 304 stainless steel sink top, 14 gauge, #4 finish
  • Type 304 stainless steel tubular base frame made of 1 ½” square x 16 gauge wall tubing
  • Adjustable leveling feet
  • Seamless heliarc welded construction
  • All exposed welds ground and polished
  • 4” high backsplash with sloped top
  • NSF approved 14 gauge sink bowls with cove corners
  • 1/8” high marine edge on around front and sides
  • Hospital grade, chrome plated brass faucets and fixtures
  • Lever handle drain controls
  • Sink bowl sizes and overall dimensions can be customized around your specific needs.
  • A wide variety of optional features are available to add to the base unit. See partial list of optional features listed below.

PDF Information Sheet

View the following 6 videos below: Automatic Sink Bowl Filling, Ultrasonic Sink Bowl, Hydro-Force System, Heated Sink Bowl, Height Adjustment, Work Sink Options.